Dinstar DAG1000-2S Kuwait

Dinstar DAG1000-2S Kuwait

The Dinstar DAG1000-2S Kuwait is a versatile analog telephone adapter designed to create a smooth connection between IP-based telephony networks and traditional devices like telephones, fax machines, and PBX systems.

Category:

Description

Dinstar DAG1000-2S FXS Gateway Kuwait

The Dinstar DAG1000-2S Kuwait is a versatile analog telephone adapter designed to create a smooth connection between IP-based telephony networks and traditional devices like telephones, fax machines, and PBX systems. Equipped with 2 FXS ports, fax over IP capability, and a high-speed NAT router, Dinstar DAG1000-2S Kuwait ensures excellent voice quality and offers powerful features. It is well-suited for various settings, including small offices, home offices, and personal use. Additionally, its automatic provisioning and centralized management system simplify deployment and maintenance tasks. For service and warranty support, please reach out.

Features

  • Dinstar DAG1000-2S Kuwait is a cost-effective ATA with 2 FXS ports
  • Fax over IP (T.38 and Pass-Through)
  • Dinstar DAG1000-2S Kuwait supports IPv4 and IPv6
  • TR069 and SNMP
  • Elastix and Broadsoft Certification
  • Multiple codecs: G.711A/U, G.723.1, G.729A/B, G.726
  • Dinstar DAG1000-2S Kuwait is fully compatible with leading IMS/NGN and SIP-based IP telephony systems

Technical Specifications

Physical Interfaces 

  • Telephone Port
  • DAG1000-2S: 2 FXS port (RJ11)
  • Ethernet Interfaces
  • DAG1000-2S:
    • 1 WAN, 10/100Mbps (RJ45)
    • 1 LAN, 10/100Mbps (RJ45)

Voice Capabilities & Fax

  • Codecs: G.711a/μ law, G.723.1, G.729A/B, G.726
  • Silence Suppression
  • Comfort Noise Generator(CNG)
  • Voice Activity Detection(VAD)
  • Echo Cancellation: G.168 with up to 128ms
  • Adaptive (Dynamic) Jitter Buffer
  • Hook Flash
  • Adjustable Gain Control
  • Programmable Gain Control
  • FAX: T.38 and Pass-through
  • Modem/POS
  • DTMF: SIP Info/RFC2833/Inband
  • VLAN 802.1P/802.1Q
  • Layer 3 QoS and DiffServ

FXS

  • FXS Connector: RJ11
  • Dial Mode: DTMF and Pulse
  • Pulse: 10 and 20 PPS
  • Caller ID: DTMF/FSK CLI Presentation
  • Max Cable Length: 3km
  • Reversed Polarity
  • Programmable Call Progress Tone

Software Features

  • Hunting Group
  • Web ACL
  • Telnet ACL
  • Action URL
  • PPPoE/IPv4/IPv6
  • Digitmap
  • Bandwidth Optimization
  • Routing Rules based on Prefixes
  • Caller/Called Number Manipulation

Supplementary Services

  • Call Waiting and Call Holding
  • Call Forwarding(Unconditional/Busy/No Reply)
  • Call Transfer (Blind & Attended)
  • Warm/Immediately Hotline
  • Do-not-disturb
  • Three Parties Conversation (3-way Conference)
  • Message Waiting Indicator

Environmental 

  • Power Supply: 12V DC, 1A
  • Power Consumption: <5W
  • Operating Temperature: 0 ºC  ~ 45 ºC
  • Storage Temperature: -20 ºC ~ 80 ºC
  • Humidity: 10% – 90% (Non-Condensing)
  • Dimensions:126×76×25mm(W/D/H)
  • Unit Weight:<=0.2kg
  • Compliance: UL

Maintenance 

  • SNMP V1/V2/V3
  • TR069
  • Auto Provisioning (HTTP/FTP/TFTP)
  • Web/Telnet
  • Configuration Backup/Restore
  • Firmware Upgrade via Web
  • CDR
  • Syslog
  • Ping, Tracert Test
  • Network Capture
  • Outward Test (GR909 Standard)
  • NTP/Daylight Saving Time
  • IVR Local Maintenance
  • Cloud-based Management