Description
Cisco Aironet4800 Access Point Kuwait
Cisco Aironet4800 Kuwait Access Point is packed with an abundance of features that offer users a better experience, top-notch security, and high-speed connectivity. The Cisco Aironet4800 Kuwait makes troubleshooting easier and enhances the context shown in Cisco DNA Assurance.
The access point’s functionality is spread out over four internal radios, so these features run simultaneously over your network. The Cisco Aironet4800 Kuwait expands the current rich capabilities of our current Aironet portfolio (with features such as built-in Flexible Radio Assignment, Hyperlocation, and Bluetooth Low Energy [BLE]) and adds a fourth internal radio to provide rich performance and location and security analytics. With more radios embedded in the access point, your wireless network achieves higher security and data analysis without degrading performance—you’ll never again have to trade security for network performance.
Features :
- Instant network analysis
- Intelligent Capture probes the network and provides Cisco DNA Center with deep analysis. The software can track over 240 anomalies and instantaneously review all packets on demand, emulating the onsite network administrator. Intelligent Capture allows for more informed decisions on your wireless networks.
- Issue detection
- With a radio designed solely for security, the Cisco Aironet4800 Kuwait is a sentry that stops rogue agents attempting to gain access to your network. This dedicated radio constantly monitors the wireless network looking for anything that can cause a threat or interfere with performance.
- Built-in hyperlocation
- When combined with Cisco DNA Spaces, the integrated radio for hyper-location provides granular data by making it possible to monitor and track devices to within three meters. Hyper-location helps both employees and guests with the application-enabled indoor wayfinding and navigation feature.
- Four internal radios
- Why does the Cisco Aironet4800 Kuwait need four built-in radios? The radios allow the access point’s features to simultaneously help securely cover your network, provide real-time analytics and wayfinding, and offer high-quality Wi-Fi.
Specifications
| General | |
|---|---|
| Device Type | Wireless access point |
| Ruggedized Design | Indoor |
| Width | 8.7 in |
| Depth | 9.8 in |
| Height | 2.9 in |
| Weight | 5.51 lbs |
| Processor / Memory / Storage | |
| RAM | 1 GB |
| Flash Memory | 256 MB |
| Networking | |
| Form Factor | External |
| Connectivity Technology | Wireless |
| Data Transfer Rate | 5.2 Gbps |
| Data Link Protocol | IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2 |
| Frequency Band | 2.4 GHz, 5 GHz |
| Capacity | Spatial streams : 3 |
| Status Indicators | Boot state, error, status, operation mode |
| Features | Wi-Fi Multimedia (WMM) support, CleanAir technology, Maximum Ratio Combining (MRC), 4T4R MIMO technology, cyclic shift diversity (CSD), packet aggregation A-MPDU, packet aggregation A-MSDU, ClientLink 4.0 technology, Dynamic Frequency Selection (DFS) |
| Compliant Standards | IEEE 802.11b, IEEE 802.11a, IEEE 802.3ad (LACP), IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11h, IEEE 802.11n, IEEE 802.11k, IEEE 802.11ac, IEEE 802.11w, IEEE 802.11r, IEEE 802.11u, IEEE 802.11v, IEEE 802.3bz |
| Antenna | |
| Antenna | Internal |
| Expansion / Connectivity | |
| Interfaces |
|
| Miscellaneous | |
| Included Accessories | Mounting brackets |
| Compliant Standards | VCCI, ICES-003, FCC Part 15.247, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15.107, FCC Part 15.109, FCC Part 15.407, EN 60601-1-2, ARIB STD-T66, ARIB STD-T71, Directive 93/42/EEC, EN 300 328, FCC OET Bulletin 65c, EN 301 489-1, RSS-247, EN 50155, EN 301 893, CAN/CSA-C22.2 No. 60950-1, EMI Class B, EN 301 489-17 |
| Software / System Requirements | |
| Software Included | Cisco Unified Wireless Network Software Release 8.7 or later, Cisco IOS XE 16.9 |
| Manufacturer Warranty | |
| Service & Support | Limited warranty – advance hardware replacement – lifetime – response time : 10 days |
| Environmental Parameters | |
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 104 °F |
| Humidity Range Operating | 10 – 90% (non-condensing) |
